Is label on the lamp of the light source. How to choose the height of the desk lamps and lamps. Desktop lamp design

Choose the most suitable For your interior floor lamp - This is a real science. This lighting device is intended to make additional comfort and harmony into the room. To date, the choice of all kinds of landscaps with a variety of lampshairs is so great that it is very difficult to give preference to a certain model. In order not to succumb to buy a beautiful, but useless item, it is necessary to determine exactly with its main function, style of execution and size. We understand which types of flooring are, what can be lampshade for a lamp, and what is important to consider when choosing a lamp.

1. The concept of "floor lamp" and the benefits of its use

it floor lamp On a small base with a high leg, which ends with lampshade. Abuirs are there cylindrical, conical, spherical or non-standard form and can be made of various materials. Leg May have different heights and diameter. All many flooring, regardless of the material of manufacture, can be divided into two large groups:

Benefits This lighting device in front of other types of lamps is obvious:

2. Types of lamps

Depending on the shape and material from which the plane is made, distinguish several variants Possible luminous flux:

It is better to choose a floor lamp from desired light effect and instrument functionality. The flooring with a directional light stream and the possibility of adjustment is a great option for organizations place for reading. And to highlight your favorite picture or a collection of statuettes, reflecting the light from the wall, slightly lower or higher.

3. Style of Torchman

Stylish and beautiful butcher will always look relevant in any interior. Pick the model suitable for your room, and must take into account style features. After all, not all materials and coloring of the lampshar are capable of supplemented, but do not spoil Furniture.

It happens that the room does not have a clearly pronounced stylistic feature. In this case, give preference to the lamp with classical form Abuzhura I. neutral color gamma And you won't lose. it optimal optionwhich benefits will complement any room.

4. accommodation options depending on the room

Each room has either recreation area or working zone or another functional place that is definitely needs in lighting. It is necessary not only to install the flooring next to this zone, but also to choose right his accommodation In relation to man, so that the light does not blind eyes or sitting did not create a shadow himself.

• IN living room The room is rational with directional light for the organization of a reading place. He must place Little behind and side sitting. For the organization of a TV zone or zone for receiving guests, it is better to give preference to lamps with scattered light, creating a calm atmosphere. In general, the landslide can be located in any place The main thing is that it does not block the overview and did not stick the space. Perfectly fit the lamp in the emulsive corner, and a couple of identical models You can place on both sides of the book rack or.
  
• IN bedroom Floors perform a function bedside lamp. Position on one side of the bed small, and on the other, the lamp of the middle sizes. Its power is enough to illuminate the entire room. You can read your favorite book, and see your favorite program, and you will not need to use.
• Neury, a calm light source is simply necessary, especially when the child is still very small and wakes up at night. So as not to scare it, take a small floor lamp with scattered light. It is advisable to choose a lampshade from unbreakable materials. If the child is older, you can buy a lamp in the form of cartoon characters, flower, sun, or just neutral tones.
  
• IN dining room very good watch arched Luminaires aimed at lighting the dining area. Color spectrum It should include warm shades, such as peach, muffled pink or orange.
  

Very winning looks tandem From several same Lights devices. Arranged symmetrically and at the same level, they will create feeling ordering in your room. And if they are supplemented with wall lamps and chandeliers from the same collection, then you will have a unique light composition. It is very easy to find such rules in any specialized or online store. If you want to increase the amount of light In the room and visually highlight the flooring, it should be installed it in front of a large floor or wall mirror.

5. Optimal lampshar material for lacker

Universal It is considered to be plaffers of neutral tones - white, gray, beige. But many consider such things quite boring and, on the contrary, want make accent With color. It is worth a resort to this method only if you are well oriented in the compatibility of colors. If not, choose a color, tosing to the total color range of the interior or separate parts, but on one or three tones lighter or darker. For example, K, covered, pillows. Selection of material Also must be justified. Textile lamp with fringe, hardly, it will be suitable to look indoors, decorated in Loft style.

• Glass The plafof will fit almost all the styles of the interior. Glass can be both transparent and matte, painted. Such a lampshade, passing light through itself, makes it softer. Only disadvantage - This is his fragility. It is worth paying tribute crystal ceiling Which perfectly complement the crystal chandelier.
  
• Metal Used for plaffers of the directional light flux. This is cold I. durable material Which will perfectly complement Loft, Modern and High Tech. Such plaffones can be chrome-plated, coated with matte powder paint or be painted by various patterns.
  
• Textile Ideal for classic style and provides romantic, scattered light. Most suitable for accommodation in the bedroom and living room. A wide variety of colors and fabric textures will make it possible to choose the perfect lamp for any interior.
  
• Paper Less durable and durable than textiles, although it has similar properties. Rice paper that is used for plafones mimic Chinese lanterns and may have the most diverse forms.
  
• Plastic, Although it is one of budget options, but it may look very stylish and interesting. Basher for lampshar of plastic is different durability A variety of colors and is used mainly for lamps with a directional light stream, as the plastic misses the light very poorly.
  

Wood Healthy will emphasize the naturalness of eco-style and ethno-styles. Such lampshades meet Pretty seldom And, mostly marked to order. Why are it very high cost. But they can be considered a real work of art.

Remember that so that he matches the best style and the designer idea.

6. Additional features

Modern manufacturers do not stop only at achieving an attractive appearance of the flooring, releasing the author's models. They try relieve the model as much as possible comfortable functionality.

Of course, models equipped with such amenities cost more But this is a very controversial question. After all, to buy a separate table and the flooring often comes out more expensive than the combined subject.

There are a number technical characteristics To which pay special attention to when choosing a lamp.

Of course, very good when there is a lot of light in the house, including artificial. But if after a tedious day you want to relax and relax, it is unlikely that it will work out when the room is flooded with a bright light emitted by a large chandelier. Need twilight, the game of light and shadows, which are created using the so-called "cozy" lamps, among which allocate the most convenient decorative lamps, floor lamps and desktop workshops .

Today we will talk about how to choose the height of table lamps and lamps so that they satisfy all your requests. Before starting, let's determine which one is the purpose of you acquire one or another type of additional lighting.

• To create a cozy with-free atmosphere, you will suit small decorative lamps that can be installed in any of the rooms zones.
• To illuminate the workplace, choose functional desktop lamps, some of them, with directional light, very comfortable.
• In the recreation area, for example, in a chair or sofa, put the flooring, it is very mobile and functional.

Combined light sources

Sometimes you can apply two different types of additional lighting. For example, it is very interesting in the interior, the flooring is found, combined with a decorative lamp, or a lamp with a working luminaire.

For example, if the height of the flooring from the floor to the top of the lampspiece is 1 m 50 cm, then the companion lamp must be at this level. It can be installed on the end at the opposite end of the sofa, on the console in the wall or put small decorative lamps on the fireplace.

Table lamps

If you need an additional source of light when you work at a computer, desktop or just read in bed before bedtime, then the table lamp is a mandatory source of lighting in the bedroom. And you should choose it carefully and nele, since it is necessary to take into account its size, power, design and functionality.

The size and height of the desktop lamps play in this case a key role, because it should light all the workspace. When choosing a lamp, you need to give preference to the model higher, since it will not work very comfortable under a small lamp.

In addition, you should purchase a lamp with a height-adjustable, depending on the situation: Do you sit on the bed or read the book lying.

Lamps

Despite the obvious advantages of this type of lamps, the flooring does not often be found in the interiors, because he in itself is rather unusual for us. And in vain, because, unlike chandeliers and sconces, it can be rearranged if necessary in any corner of the room without montage and other inconveniences. The main thing is that the socket is nearby.

Tesser, in a traditional understanding, consists of support and lampshar, and modern models can surprise the variety: a column, flower, wood.

Decide on the purpose of the lamp. The background lamp can be low-power and with a lampshade aimed up. This technique is also suitable for rooms with low ceilings, since the flow of light visually lifts them. Locker to work or reading should be more powerful, with lowered down lampshade.

As in the case of a desk lamp, you can choose a flooring with an adjustable height and angle of inclination of the lamp, then its use will bring you a maximum benefit.

Decorative lamps

To form a relaxing atmosphere, and the creation of comfort in the room, small decorative lamps are used. They, as a rule, are static, and differ from the working desktop lamps by the fact that they are not regulated, their height does not exceed 40-45 cm. Often, decorative lamps are purchased by pairs, and perfectly fit into any interior, thanks to a variety of their designs. They are easy and mobile, so such lamps can be moved anywhere: put on the chest of drawers, a fireplace, a coffee table, a bedside tables.

Table lamp do it yourself - one of the most affordable ways to decorate the interior and give it an individuality. As soon as the designers of the pro and lovers are not thrown over them! The reason is simple: in relation to the functionality and capabilities of creative expression to the required costs of materials, labor and skills, the desktop lamp firmly holds in the top of the leaders among household items. In this article and we will see what you can do with it, it is not particularly straining or a hand or a wallet. Only fiction.

What to do?

Rate bearing lamps (pos. 1 on the next. Fig.) Light the working area that does not require the operational movement of the light spot on the table surface: dressing table, writing desk. The possibilities of decorative design in this case are the greatest. Technically, the design of the desk lamp on the rack is most simple. The possibilities of operational adjustment of the illuminated zone are practically absent. Adjusting the illumination of the working area is possible if there is a thyristor voltage controller in the lamp, but the spectrum of the emitted light changes significantly.

The vast advantage of racking desktop lamps is the possibility of obtaining relatively simple means of T. Naz. Cosneiss-square focus diagram (DN) illuminator, see also at the end. The costerans-square DN provides within a certain angle of the function of the uniform illumination of the working area (see Fig. Right), which dramatically reduces fatigue from intense intellectual labor.

Lamps on a leaving hinge bracket (pos. 2) are more suitable for technical creativity. The lamps on the bracket-pantographer at home are impractical and technologically complex, and make a lamp on a flexible bracket at home will cost more than buying ready.

Desktop lamp design on a broken bracket is limited by concise-utilitarian forms. The design is more complicated than the lamp on the rack primarily due to the requirements of electrical safety, see below. The possibilities of operational adjustment of light in the working area are wide and largely illuminated by the area, and in its illumination with a constant spectrum.

Console table lamps (pos. 3) in everyday life are less common, because For stability require a heavy base and, most often, a counterweight, which complicates and increases the cost of construction. The possibilities of operational adjustment of light in the working area in the console lamps are less than that of the lamps on the brackets, however, it is possible to obtain a squa-square DN.

Desktop lamps without elevation of the light source over the support surface are no longer table lamps, but night lights (pos. 4). The principal difference between those and others is that the working area with certain requirements for the light in it is not available. Accordingly, the light from the night light can be anyhow, if only health does not harm.

Design

In the desktop lamp of any type you can highlight the trail. Design elements:

• Electromechanical - Provides the stability of the lamp and a safe supply of power to the cartridge of the lamp.
• The reference - supports the illuminator or reflector and, possibly, allows you to change its position.
• Illuminator - an electric bulb in the lampshar or reflector.

The electromechanics in the design of the desk lamp the role plays only inspired, because it is possible to be stubbing into the support of the illuminator. Designer delights come on support and illuminator. In the rack lamps, as a rule, the main aesthetic load is barbered, and the rack complements it; In the hinge - on the contrary. But exceptions from this rule is complete.

Electromechanics

The board lamp electrochem is simple: network plug, cable, switch, bulb cartridge. Sometimes the voltage regulator is added. Suspended cartridge lamp E27 (under the base of the lamp of the usual width, pos. 1 in fig.) It is possible to mount only on a threaded shank M10 or M12. The cartridge for a narrow base-minion E14 is also attached to the thread or on the lamella in the form of a steel strip; The nest under it is shown a green arrow on the pos. 2. For the desktop lamp, chandral cartridges are best suited (pos. 3) with precipitated threaded flanges: between them you can hold the steel tablet with the lampshar frame or the clamp for fastening on the hinge. Drawings of the chandelier electric cartridge E27 of different modifications are given on the pos. four.

Make a desk lamp is necessary to ensure its electrical safety. This is especially true for lamps on hinges and console. Safety of the desktop lamp is quite simple:

1. The cable must be taking round in double isolation.
2. Conductive cable veins are flexible, from many wires. The cross section lived from 0.35 square meters. mm.
3. Cable Wiring Places Through Conducting or Capable Design Details should be protected by sufficiently strong flexible dielectric sleeves, cuffs or knee.
4. The cable inside the lamp design should not be stretched.

The scheme of the mechanical part of the support with a prift of the homemade racking lamp is shown in Fig.:

The cable from the inside before entering (is highlighted in color) is tied by a nodule or pull through the holes of the dielectric locking washer, so that, pulling it outside, the cable could not be cut inside. Decorative finish made of polymer clay (plastics, cold porcelain) on a chopped plastic bottle nerd - an option optimal at home, but, of course, only one of many. Want, for example, to sharpen the decorative shell of the rack from the tree - please only on the mechanics of the village as it should. However, the polymer clay as a table lamp material allows you to realize the most original ideas of its decor and quite satisfies safety requirements: the dried polymer clay is mechanically durable not wetting non-flammable dielectric.

Original supports

It is not necessary to burn a fairly complex and requiring turning work, if its lamp lamp is lightweight, for example. From the threads (see below) or thin rigid plastic, and put the light regulator in the support, etc. Electronics is not assumed. In this case, a rather stable lamp support is obtained from a "puzzled" glass bottle with a wide bottom, pos. 1 in fig. A narrow bottle can be pulled out by sketching the pebbles in it (pos. 2), steel balls, etc. The cash holder is fixed on the neck with a regular threaded cork or a piece of solid expand solid foam, protested along the threads of the throat.

The hole for the cable in the bottle is drilled by a tubular thin-walled diamond drill. But the glass is not at all the fact that the tile, so it is necessary to drill it:

• The bottle is put on the side and securely fix.
• Around the future holes are pushed out of plasticine height 2-3 cm.
• Water poured into the resulting hole.
• Drilled under a water layer at least 2500 rpm with a gentle and smooth feed.

As a bottle from the whiskey "Jack Daniels", a table lamp is made, see the video below:

Video: Bottle Table Lamp do it yourself

Such a lamp will organically fit into, steampunk and other technogenic-utilitarian. Just do not make a mistake, do not try to make it a lampshade of a flower pot or any other dishes. Technogenic-utilitarian styles are not a meaningless journey of the hob, their concepts are clearly thought out. The elements of the interior for them should be related to industrial, not agricultural or food production. Lampshade, for example, need a tin reflector from an old production attachment on a pantograph, automotive headlamp, a small spotlight, etc.

In fig. On the right shows another very original version of the "real big" table lamp of ... Rope! It is done in this way:

1. The rope take natural organic overlap 6 + 1, i.e. 1 strand along the axis and 6 around the circle;
2. The segment of the rope is stretched with hands and weakens, turning simultaneously in different directions against the direction of the obsession of strands;
3. The axial strand is neatly pulled out and insert instead of a thin-walled copper tube with a fishing fishing line for a cable tightening;
4. The rope with the tube inside is tightened by turning his hands in the direction of the obsession;
5. The ends of the rope are firmly fixed on the tube with a winding with a cord;
6. Tighten the cable into the tube;
7. Bottling and knit knot. You need to bend little, carefully so that the tube does not adversely;
8. The rope is once again tightened, selecting the seed strands, and soak acrylic varnish.

Note: The tube must be taken for air conditioning systems, from oxygen-free copper. The red-walled gas or electrical tube in the node will certainly admire.

Features of the hinge

The mechanical part of the desk lamp on the hinge bracket is more complicated. The lamp shown on the left in fig., Does not comply with the requirements of electro- and fire safety: the cable is clamped in combustible parts and with the manipulation with the illuminator can be pulled out. Its hanging down the loop can be coated with hand or sharp item.

The cable to the bulb cartridge in a desk lamp on a hinge bracket should be carried out according to dielectric non-heat knees or between the sidewalls of his links, or if the hinge is solid, on its top, in the center and right in Fig. In this case, the cable on the link of the hinge must be consolidated. If the links of the hinge tubular, the cable is paired inside them. In any case, ω-shaped cable loops with a diameter of 60 mm, but not less than 12 diameters of the cable make over the fuses of the hinge. At the transition of the cable from the bracket to the illuminator ω-loop, they are made from 90 mm, but not less than 20 diameters of the cable.

The balance of the desk lamp on the joint changes wide limits and ensure its sustainability is quite difficult. Producers, because of this, sometimes invent such systems, which is easier than a flashlight shine than setting up the light from a soul miracle, see fig. left. Therefore, desktop lamps on hinges are often supplied with screw clips.

As a screw clamp for fastening a homemade table lamp to a tabletop, a small joinery of the clamp is perfectly suitable, see fig. on right. Better clips for a lamp from a furniture store: It is cheaper, keeps more reliable. Capturing clamps is wider, and the lamp can be attached to a tabletop by any imaginable and unthinkable thickness. It is necessary to ask for a joiner, because Sponges of fitter clamps without a soft coating.

In the lamp holder, the clamp is converted by a socket from the steel tube with a diameter of on from 10 mm and a length of 120-150 mm. In the tube approx. Half lengths make longitudinal cutting width in the thickness of the clamp of the clamp. The nest is attached to the clamp through bolts. The nest is tight, but not tight, insert a steel pin with an eye, which is a fixed link of the lower hinge bracket lamp. Well here are suitable hooks for pendant chandeliers with a curved end in the ring; The carving on prevents them in a smoothly rotate in the nest.

Adapting the clamp under the lamp holder, it must be remembered that its cage is made of highly carbonated steel; So it is necessary that the luminosity of the clamps can be denied under the oppression of compressible parts. High carbon steel is very hard and rather fragile, so it is necessary to drill it with a carbide drill at 800-900 rpm with a non-strong smooth feed. Kolotnoy solid objects and try to adjust the clip of the clamps can not!

Illuminator

This desk lamp node should give the right light into the working area and is often the main decorative element. Here you need to note first of all that compact, light and economical LED illuminators (see Fig.) Well shine only in 3D models. Their light of medical and sanitary requirements for local workshop is still not satisfying.

Reflectors

Illuminators of table lamps on a hinge make reflex, lampshade for them are too cumbersome and hard. The reflector must be selected parabolic, it gives a fairly concentrated and even light. A single conical reflector can be made itself, but the light from it is uneven, tiring his eyes, and much in vain "spread" to the sides. The reflectors of good hinge desktop lamps are made with a reflective surface of the 4th order of curvature (eg, in no more than 20 years of the popularity of "Hobby"), but it is unreal independently.

The output, if the appropriate reflector is not - use a krypton incandescent lamp with an internal reflector, it is also of conscientious producers of the 4th order of curvature. In this case, the manufacture of the illuminator comes down to the installation around the band of the shell of any form from any sufficiently durable and lightweight material protecting the lamp from random strikes.

The reflector of the reflection of the desk lamp on the hinge bracket must necessarily have up the opening or hole for the output of heated air. Fluorescent lamps - housekeeping and LEDs warm it seems to be weakly, but from staying in a heated airbag, their resource decreases sharply, and they are not cheap.

Shade

Lights of racking beam lamps are performed in the form of a light bulb under. Its appointment not only to be a fertile field for the decor, but also partially a light reflector, which ensures the desired illumination of the working zone of a given value. A downtile lamp lamp can be made hard frameless and soft on the frame. The lamp shade is made more often of the wire in the form of a truncated direct cone, on the left in fig., With simple (in the center) and complex (right) curvilinear form.

The simplest way to cover a direct conical lampshair - ribbon segments. It is time consuming, but it is good because the outer surface is obtained smoothly curved, without dome. The seams on the rims of the lampshar are masked by Ryushami (pos. 1 on the next. Fig.), Braid, fringe, etc.

Circling the fabric in the form of a sweep of a truncated cone for the covering of a conical lampshar no meaning, because As a result, the label is not a conical, and faceted, pyramidal. It will be easier to sew an amusing case from Kliniev, the patterns of which are built step by step completely without the use of geometry:

• On the frame section, the sheet of fine cardboard or dense tight paper is applied;
• Cardboard / paper is adhered to a frame with a rubber band or tape;
• The circuit of the pattern is driving from the inside, it will give the non-roll of the fabric needed for a dense tightness by her lampshar;
• Fabric take satin, sarrenchy or staple weaving;
• It is so that the filaments of the fabric bases are oriented along the longitudinal axis of the pattern.

Ready lampshade are often decorated with sockets, bows, etc. At such a case there is an interesting designer reception: the main fabric takes a thin, well translucent colorful, and the outlets are spinning pale pastel tones or completely bright, pos. 2. The lamp is modestly in the interior, and it is necessary to include in the dark - all is cleaned.

How to trim the lampshane

On the lamp shade with complex curvilinear ribs (with the "Waist"), a seasy case can be simply throwing and pulling tapes (pos. 3), thread, rubber band. But according to the rules of the inspection of the lamp, the cloth is done like this:

And differently?

There are other methods for making the lamp lamp lamp lamp, allowing to embody in the material a variety of original design ideas. For example, from the usual papers of paper glue-blank (pos. 1 in Fig.) And twice impregnate it with acrylic varnish. After drying, Lanolin is rubbed into the nerd several times until it stops absorbed. A covered with a lanolin, a blank is wrapped up with a thread stretched through the glue PVA, as in the manufacture of Christmas tree toys with their own hands. Device for pulling the thread through the PVA is shown in Fig. Right below. The finished hard case of lampshar with drops of glue is fixed on the frame, which can only consist of the lower rim, fastening screeds and a table cheeper under a chandelier cartridge.

On the same nerd, a hard seamless lampshade of fine synthetic fabric is made. It is wrapped with a cut out of a truncated cone (with the allowance) sweep of a truncated cone. The fabric is fixed along the edges of the paper with the clips and impregnate the acrylic varnish with a wide strip in the middle. When the lacquer dry, the clips remove and impregnate the edges outside. Paper from dried lampshar dyed. Wasters inside cut into bends in the bends are embedded in a thick fishing line and fix the glue drops.

The framework with curvilinear ribs can be spoiled by horizontally strips of fabric (pos. 3) or narrow ribbon, newspaper tubes, straw, etc. According to lighting, an ordinary propylene twine is great, but his aesthetics is ... not even that ... Finally, a soft textile case for lampshar can be sewed with a simple straight sleeve on the diameter of the lower rim, and on top of the dock, pos. four.

Very original

The following 3 variants of lamp lamp lamps are among the externally extravagant, but ensuring very good lighting indicators. What, by the way, it is impossible to say about many homemade textile lampshairs. For example, we buy (steal - sinful, as the captain of Barbosa would say from the Pirates of the Caribbean Sea)) Milk plastic ceiling for street lamp. Not so expensive, perfect light refinement with light scattering, and not beats. And below - a wide opening, through which light will be released enough for local work lighting. The outer surface of the ceiling decorate decoupage on a transparent basis or sign up. What happens in the end - see in Fig. But this is, of course, an option for an amateur, resistant to psychedelic influences.

Plywood or males on the adhesive shade (see Fig. Fig.) Due to the internal reproduction, it has good light light and softens the light. Even LED light bulb with a matte flask can be put in the table lamp. The rims are the hoops for embroidery of different diameters. In the same way, you can make a desk lamp integrated with lampshade (right in Fig.) On the table, it will take a lot, but it looks original, "environmentally", and the light gives very soft, not taring.

The desktop lamp integrated with the lamp can also be made all of the same wonderful material -; In a thin layer, it is translucent. The lamp-jellyfish (see Fig. Right) Made from it. Production procedure is as follows:

Green lamp

Review the old photos with Lenin, Stalin, Churchill, Roosevelt, Theodore or Franklin Dela, Mahatma Gandhi. Or, if you want, with Hitler, Mussolini, General Tajiye, Chan Kaishi. And pay attention to their desktop lamps. True, look like the one that on the left in Fig? Which in the USSR "broad layers of the population" was not sold? And which gave rise to the winged expression "green lamp"?

Green Text Top Lights Luxury Antique and Modern

"Green lamps" are now produced and well bought up. True, judging at prices (right in fig.) They did not become more accessible to ordinary citizens. The secret of the "green lamp" - in the lampshar of the painted in the mass of green glass, from the inside of the coated translucent (more precisely, on the 3/4 transparent) layer. The shape of the lampsier corresponds to a completely defined mathematical law. Within wide, approx. 3-diameters of the lamp lamp, the working area of \u200b\u200bthe Green Lamp DN, and then the illumination is very smoothly moving into a greenish twilight. A little raised the eyes from the papers - the eyes and mind rest.

Each room in your home can be visually increased due to light and illumination, ranging from natural light, such as sunlight, and ending with artificial, such as lamps and lighting reinforcement. When you select an ideal lamp for your interior, have you ever thought about what type of lampshair will most successfully look like in your setting? Here are collected tips for you to choose the perfect lighting device for your home, from a hanging lamp lamp that hangs over your dining table, to outdoor lamps that adorn your favorite chair.

1. Choose a lampshade that emphasizes the colors of your room.

Your living room, bedroom and any other place that needs an illumination should be considered as a whole when it comes time to choose the color of the lamp. If you want the light to be a central point of the room, then you should choose bright colors that will be highlighted against the rest of the decor. For a more subtle approach, choose neutral tones.

2. Choose a lampshade that has a correct combination with its basis

When choosing the perfect lampshar, consider it and the base of the lamp as a pair. If you consider what you have a lamp (tall and slim or big and wide), then choose the right lampshade will be much easier. The lamp shade must be low enough to cover a switch slightly, but not so low that you have to get down to turn on or off the lamp.

3. Decide how the lampshade will fit into your interior

Before you fully concentrate on how the lampshade looks like, do not forget to look at the place where you are going to "wear". Little dimensions can be needed for sleeping table, if the table is small or if there is not enough space in order to freely go to bed and get out of bed. At the same time, the lamp near the chair may be more significant sizes.

4. Decide why you need a lampshade: for design, directly appointed or both for the other

Each lampshade that you bring to your home should not be easy to perform your functions. While spreading the light from the light bulb in order to create a relaxed atmosphere, obviously good for your lampshar, the color of the lamp also can change the situation. The use of only white light in the house, especially for lampshades, will give you a maximum lighting. Consider the possibility of using lamps of light tones to distribute more light in the room, and in order to create a special mood and an atmosphere indoors, choose darker lampshates.

5. Choose a hanging lamp shade that will decorate the room

Outboard lampshades have passed a long way in interior design over the years. Returned large shelters, dynamic colors and large lamp sizes, reminiscent of the 60s and 70 years, when large drawings and bright colors played a huge role in design! Call these elements when choosing a lamp for a kitchen. Make sure your dining table is made in a similar style and is able to successfully emphasize the lamp.

6. Check lampshades in non-traditional rooms of your home

When choosing the right lamp, remember that the lamp can be delivered in the bathroom, basement or laundry in order to add the atmosphere and create aesthetics that lacked there. In many modern houses, designers use suspended lamps-drums to create a central point in relation to a separate bath. If you have a tabletop in the laundry room, why not place a small lamp as a "night light", for lighting, which is so necessary when passing through an absolutely dark room? The correct lampshade can be completely changed in unconventional premises.

7. Make a statement by your absentee or do not do it

Choosing a lampshade, do not forget to look at your room to determine if you want to make a bold statement or prefer the lampshade to mix with the surrounding decor. Emphasizing the colors and fabrics used on furniture can be an inspiration for lampshades that move the flower palette of textiles, wallpaper, carpets and decorative pillows.

8. Security is the main thing

After you have chosen the lampshade that you liked, make sure that the distance from the light bulb to the lamp is optimal, since all the light bulbs heat the surrounding space. Size can be configured by stretching metal horns, which extend from the "saddles" of the lamp to keep the lampshade. There is another way to adjust the distance. To do this, it is necessary to use various sizes of installers that are located above the light bulb to make sure that the lampshade sits absolutely safely and protect the lamp shade.

9. Choosing the right lamp, take into account the lamp shape

If you want to replace the current lampshade to another, take into account the various available forms. Barabana / cylinder lamp shape, ampir style, kouli or traditional bell tag will help create a special style of your room. Many lamp manufacturers will help you make your right choice with the help of the basics, they will make their suggestions about which form is better.

10. Make your own lampshade with all the individual wishes.

In our modern world of social exchange opportunities to make projects in the style of "DIY" seems to be the best way out of any situation! If you are cunning, then why not make or not decorate your own fabric using ribbons, knitted roses, fabrics, or other jewelry for a unique appearance, which can be contemplated only in your home! For creative ideas, see Pinterest, Etsy and other sites for simple, but unique lampshades, from which it is impossible to take a look.

Each room of your home can be done even better due to light and illumination, which proceed from both natural, both sunlight and artificial sources, such as lamps and lamps. Have you ever thought about what lampshade will be best looking at the interior of your room? Below are simple tips for choosing the perfect lamp to your home, from the suspended dinner table to the landsser, which adversely adorns your favorite chair for reading.

1. Pick the lamp shade, the best combined with the color gamut of your room.

Choosing the color of the lampshar, perceive your living room, bedroom or any other room that requires lighting, as a whole. If the lamp needs to make the center of the room, then you should stop your choice on bold bright colors, stand out on the background of the entire interior. With a more subtle approach, use neutral tones in the color of your lampshar.

2. Choose a lampshade that is properly combined with the base.

Picking up the perfect lampshade, consider it in a pair with the base. And then the choice will primarily depend on how the foundation is high and narrow, or low and wide. The lamp shade must be low enough to cover the switch, but just so much so as not to interfere with free access to the latter.

3. Decide how the lampshade will fit into your interior

Before focusing on the appearance of the lamp, do not forget to look at the space around him. So, the lampshade on your bedside table must have a smaller profile if the table is small or if there is not enough space for free bed access. At the same time, a more overall lamp can be approached for an outdoor lamp standing next to the back of the chair.

4. Determine what you need lampshade: for decor, functionality, or even for both at the same time

Each lamp in your house should not be only for functionality. Of course, it's good when the lampshane dispels the light from the lamp and creates a relaxing atmosphere, but the colors also play a big role. The use of white color gamut in the interior of your home, especially in the lampshades, will give you a maximum light.

5. Choose a hanging lamp shade that perfectly fit into the room

In the design of interiors, the suspended lampshades passed quite a long way. The time of bold colors, large prints and broad lampshades, which were very popular in the 60x and 70s came. Bring these elements to your dining room, pre-taking care that the dining table corresponds to the selected style.

6. Place the lampshades in the "non-traditional" rooms of your home

In search of the optimal lamp, remember that they will be able to decorate such "non-traditional" in this context of the premises, like a bathroom, basement or laundry. In many modern houses, designers often use suspended lamps, fixed directly over a separate bathroom in order to make accent on it. If there is a table in your laundry, then why not put a small lamp there?

7. Make an emphasis on your lampshades or do not allocate them at all

Before installing the lampshade, look at your room and determine if you want to concentrate on it attention or you want it to mix with a common interior. The colors and fabrics used in the furniture will be able to supplement and emphasize the lampshades implemented in the same color scheme as wallpaper, carpets and pillows.

8. Choosing a lampshade, first consider security

Once you have decided on the lampshade, make sure that it will be at a safe distance from the lamp and other heat sources. The lampshade can be regulated by metal rods that are stretched from the cartridge and serve to maintain the lampshar. Another way to adjust the layout of the lamp is the use of special fasteners of different sizes installed above the lamp in order to prevent the ignition of the lamp.

9. Choosing the right shape of the lamp shape suitable for the lamp

If you want to replace your lashure to another, keep in mind that there are many different forms: cylindrical, outdoor, Empire and Kuli style and traditional a la "bell". Most lamp manufacturers will be able to advise what reason and the shape of the lampshair you better use.