Unpin the car's cigarette. Vashtuvannaya car cigarette lighter and connection diagram (polarity). What the car smoker doesn’t do - the main problems, reasons and ways to fix them

Since previously the car cigarette lighter (AP) was used only for its direct purposes, there are now a lot of devices that can be connected to the on-board system through a new one. The article looks like a car cigarette lighter: plus and minus, advantages and disadvantages.

[Prikhovati]

Advantages and shortcomings of car smokers

As soon as he appears, he is deprived of an invisible part of his possession.

With the development of technology, a variety of devices have appeared that provide sufficient support for the on-board side of a car. AP became vikoristovuvatsya as a car socket. The operating principle will be adjusted without changing. And then a variety of triplets and adapters appeared, which expanded the capabilities of AP stagnation (the author of the video is With Your Hands).

The main advantage of a car cigarette lighter is the ability to connect great amount various electrical accessories that may be needed on difficult journeys or to improve the comfort of the trip.

The fragments pass through the AP through a very heavy stream, its design is unreliable. In addition, the permanent device senses additional mechanical input through the constant connection of various devices. As you travel beyond the vibration frame, the contact between the AP and the socket is destroyed. As a result, sparks may appear, which may cause a short circuit.

I’ll add an electric Lanzug

To successfully repair an AC, you need to have basic knowledge of electrical engineering and know how to operate an electrical device: where there is a plus and where there is a minus.

To measure the plus and minus, you can measure it with a multimeter.

Photo gallery “Prikuryuvach and Yogo Schemes”

A handle-button protrudes into the automatic cigarette lighter, and a button presses on it. When you press the button, the electric lancet closes and the spiral begins to heat up. As a minus, the sides of the metal body of the AP act as a minus.

Knowing the polarity of the device, it will be difficult to repair the car cigarette lighter.

For whom it is necessary to cancel the following actions:

On the opposite side of the AP, screw the nut.
Let's take a look at the device next.
At the bottom of the structure there is a conductor plate. This could be the cause of the malfunction. In this situation it is necessary to pull out.
On the body you will need to use a file to cut off the protrusion.
Now you need to pick up the devices.
Next, clean the 7mm holes and then connect them. In addition, they need to be pressed with glue.
In the cabin, you need to remove the center console and turn off the lights.
The block is removed and the parts are added using special clips. A wire of white-brown color is connected to the dart from the backlight. There is no more yellow and black darts, connect to the AP darts.
Then the darts are laid down and attached to the plug of the car cigarette lighter.
Then the cigarette lighter rotates in place and the light switches on.

Visnovok

In this way, you can recreate the efficiency of a smoker with your own hands. The polarity of the car's cigarette lighter plays a big role in the connection process. It’s important for him to kindly ask, and I’ll figure it out, plus or minus. It is important to be happy with the doctor and carefully follow the instructions and recommendations of the manufacturer.

Light a cigarette, it’s a device, it’s a direct reason to light a cigarette while you’re driving the car. And the axis of the nest is lit, with a twist current technologies, began to be used to connect various electrical accessories to the on-board system in the car, such as a navigator, video recorder, charger mobile phone, laptop, car compressor and many other devices. Suchasna lyudina no longer finds himself without his car and without his identity Stilnikovy bond, and the only place to connect various accessories to the car is the cigarette lighter.

Pros and cons of smoking

Its undeniable advantage lies in the fact that to its socket you can connect a lot of electrical appliances that are so necessary during travel and to make life easier: a charger for a smartphone or laptop, a recorder, a mini-electric kettle and a bag then others.

The Great Nednik is a sample of the Great Strumiv, behind his own structures, not hedgehog, but Bagato of the Construction Elektrotrodi, such yak laptop abstors, the great need for living. Even more powerful is the stream that passes along the lanjug, these are the most important and most reliable to blame for everything. Naturally, it would be good if, in order to increase the value of washing the fork in the socket of the smoker, they began to produce saws, on which there would be more squeezing paws. But today, in most cases, the external contact and two pressing pads are installed, and the center contact plate in the socket is placed at different depths, sometimes even small.

Over the course of travel, shock and various types of products may damage the reliability of the contact between the socket and the plug. This can happen if the connection sparks more quickly, causing a short circuit or causing confusion. In addition, a variety of different wire cutters and adapters for cigarette lighters are becoming increasingly popular, giving the ability to connect to multiple electrical appliances, and thus increasing the importance of interconnection it reduces the reliability of the system.

Cigarette connection

If you don’t have a cigarette lighter, it’s difficult to stay in the car, even if any motorist knows that there is only one “socket” in the car to connect such dirty and simply handy devices. As a matter of fact, it is no longer possible to recharge a mobile laptop, connect a navigator and make more simple and common speeches. Many cars are wondering how to connect this little thing with their own hands and not resort to the service of a car mechanic.

Tools

To independently connect the cigarette lighter in the car, you need the following tools:

pasatizhi;
twist;
drinks (you can take a needle file);
soldering iron

Sequence of work

When you turn on the cigarette in the car, you need to follow the song sequence in the work:

twist the nut located on the back side of the cigarette lighter;
remove the device itself;
in the lower part of the device it is the conductor plate that is to blame, which often causes the cigarette lighter to stop functioning normally;
the plate is removed due to lack of need;
on the body of the device, the protrusion is filed off with a file or a file;
After you smoke, you need to pick it up;
the darts for connecting the cigarette lighter must be cleared to 7 mm;
on all darts they are pressed with glue;

Important! Make sure that the polarity of the wires is connected, otherwise, when you start to connect, you may cause a short circuit.

Now you need to remove the center console from the car;

Please! To ensure the handiness of the robot, it is important to install the armrest and casing as important as possible to make the robot more difficult to operate. Even the screws are not loosened by hand and it is important to reach them.

Sometimes it may happen that the diameter of the ring does not fit the required opening, the ring may appear wider than the diameter. You can then use a file or file to enlarge the opening to the required diameter.

After the device is connected, you must immediately check whether it is functioning normally.

How do you connect to the cigarette lighter?

Many drivers respect the smokers in the car. Water, which is used to scorch, is used as a sparkler, but non-Kurks don’t need wine at all. Ale, after all, it’s not for nothing that the smoker installs it on new ones today's cars, and even to this socket you can connect any of your favorite and necessary devices. Let's take a look at the most popular and necessary ones that can be connected to the cigarette lighter socket.

Gunpowder Even though the cleanliness of your favorite machine is as important as the cleanliness of your cubicle. Automotive vacuum cleaners that work as a cigarette lighter are even different, and are subject to weight, number of nozzles and from the outside looking in.

Autocompressory eliminates the need to inflate tires the “old way” with a pump. You can easily inflate an inflatable jet, mattress or swimming pool with an auto-compressor. Compressors come in different strengths.

You can connect fan. If you don't have an air conditioner, it's hard to use this device.

Another hand-made and brown device can be called a heater for cars. You can use a fan heater for quick heating and defrosting of the warehouse or a heated cover for the seat. They are easy to connect and easy to dismantle in warm weather.

Mobile phone . Today it is impossible to see a person without Stilnikov phone, And you can run out of battery at that moment if you use the phone, well, it’s simply necessary for life. What are different types of phone chargers for? Also chargers for various batteries, for example, for laptop batteries, AA, AAA finger batteries and others.

Adapter By connecting it to the car network, it will make the life of the motorist in adulthood much more comfortable. For this additional help, you can quickly use an electric razor, recharge your tablet, and other low-pressure devices. Adapters are either universal or specialized.

At a distant dose it turns out well container for heating up hedgehogs Or, your dear masterpiece is a microchvil’s pich.

Radio connection. On most modern cars, car audio is installed, but on older ones, especially those made from cotton, there is no such line and most often the wiring to the radio is connected before lighting the cigarette.

Wikoristan rules

All electrical parts that are connected to the cigarette lighter must be followed in accordance with the operating instructions for electrical appliances. This means that you should not overdo it (it is important to read the instructions before using electrical accessories).

When peeling, it is necessary to tighten the tension of all connected devices.

The main thing that follows the memory is that when the engine is turned on, electrical appliances continue to operate and there is a risk of discharging the battery, especially when connecting appliances such as a car refrigerator or video recorder.

We learned how to turn on the cigarette lighter, and also found out what was needed. If you are missing one socket, we recommend watching this video that will show you how to connect the cigarette lighter in your car:

The smoker must always, without any problems, provide energy to all companions that are connected to his socket through the on-board transport system.

A car cigarette lighter is an accessory that is primarily used for igniting cigarettes with water.

The power of the smoker became practically irreplaceable from the moment of creation. However, this importance was replaced by a cardinal rank. Today, the socket is used as a car electrical socket.

With the help of a smoker, you can ensure the electrical power supply of such portable devices as:

Obigrivach;
Car cleaner;
Charging device for navigators, video recorders, phones;
Elements of interior lighting.

Almost all additional electrical installations, designed for autonomous operation in a car, have a special input required for connection to an improvised socket.

The device controls the life of the vehicle's electrical system. This connection is made through the mounting block without connecting the relay directly to the battery. The protection of the barrier is ensured by a fusible protector, which is insured for operation with a current of no more than 10 amperes.

As soon as the device is in operation, a short circuit occurs, the force of the flow moves sharply, the thread of the sealer melts and ruptures the electrical lance, causing damage to the electrical wiring.

With the method of additional protection from Lanczyug's life, as well as for manual heating by supplying a stream, the cigarette can be connected via a relay. However, a similar connection scheme is not used in automobiles of the same vintage. There are 3 darts to reach the cartridge, molded in the panel:

Permanent "minus";
Permanent plus, leads through the charger from the car battery;
“Plus” from the side lamps, which come up to the light bulb of the device and only work if the external lighting is turned on.

It is only possible to install the ignition system for connecting the cigarette lighter of an electric car, since the electrical circuit will be equipped with a different relay. Without which lance the thickened ignition does not vitre the vantage.

Pristriy

A traditional car cigarette lighter consists of two parts – the cartridge and the socket. At the center of the cartridge there is a metal shear, which plays the role of positive contact.

The “-” contact is the outer metal shell.

There is a gasket between the positive and negative contacts, which turns off their switch. The connection “+” and “-” operates through a nichrome spiral, which determines the function of the heating element.

When applying electricity, the stream passes through a spiral, heating it to high temperatures. When the cartridge reaches the singing temperature, the supply electric struma relies on an additional thermal relay, molded from a plastic handle.

The socket is completely buried in the car panel, in which a metal tube and a central contact are inserted. The "+" from the battery is supplied to the central contact. The shell of the nest is a permanent “minus”. There is also a backlight lamp on the body of the cigarette lighter that turns on automatically when the external lighting lamps are activated.

To turn down the heating mode, you must submerge the cartridge at the socket. When the pin is fixed in the pressed position, the positive contact of the cartridge is connected to the “+” socket, the “-” socket is in contact with the “minus” terminal of the cartridge.

The heating element is still working. As a rule, 15-20 seconds are enough for the coil to heat up, after which the cartridge rotates in the exit position with a slight clicking sound. If the onboard voltage is low, the heating time may be longer.

Improved

As it was said above, the car smoker today is used to operate a lot of devices. For that one nest may not be enough. You can increase their quantity by using special devices that are sold in car dealerships - cigarette dispensers and dispensers.

The device is a block in which there are two or three (depending on the selected model) sockets. The unit is connected to a standard cigarette lighter with a power socket connected through a wire to the contacts of the three-piece.

The alarm unit itself can be secured to the car panel using double-sided tape or silicone sealant. In this way, it becomes possible to simultaneously connect not one, but a number of devices that work as a cigarette lighter.

The first cigarette lighters appeared in the 1920s and they became one of the indispensable elements in a car. Over the course of the formation and development of machinery, the operating principle of this miniature structure has not changed, but the axis of function has expanded significantly. Today, with this additional device, motorists charge phones, tablets and laptops, connect car pumps, vacuum cleaners, fans, compressors and much more. Well, and of course, a cigarette lighter is simply indispensable for chickens, both for those who have always smoked cigarettes and for lovers of electronic cigars that are charged via USB.

Unfortunately, regardless of the appearance of all the triplets for the cigarette lighter, the central element is missing only one, and there are a number of advantages and shortcomings that must be avoided during the operation of this cinnamon device.

Advantages and disadvantages of automobile cigarette lighters

The biggest advantage of a cigarette smoker is the ability to connect to a new large number of electrical devices, which will make life easier in high doses. However, due to the commutation of such great connections, the structure of the structure is unreliable. Moreover, it is impossible to miss the fact that immediately, by connecting gadgets to the cigarette, we create a mechanical focus on their elements. Ideally, car manufacturers would think about increasing the price for vehicles large quantity squeezing paws. Then the fork would have been trimmed more “singing” by the smoker.

It’s a pity that for the time being most of the sights only have a spring contact and a pair of pressing legs. During the hour of driving and the natural vibration of the car, the contact between the socket and the plug is destroyed, as a result of which the cigarette lighter begins to spark, and sometimes causes a short circuit and operation.

Since this element is in good condition, it can be repaired independently, without having to match the polarity of the car's cigarette lighter.

Electric lancet of the smoker

If your car doesn’t have a light or it’s broken, it’s not easy to get to a car mechanic. It is enough to understand how the electric lance works.

Well, plus the prikuryuvach - the button itself is a handle. When pressed, the lance closes and the spiral begins to heat up. If we talk about those that de minus the cigarette smoker, then there is nothing foldable here - just the butt walls of a metal cylinder.

Knowing this parameter, you can easily install and correct damaged cigarette lighters in your car. For whom:

Unscrew the nut on the rear side.
Light a cigarette.
Locate the conductor plate at its lower part and remove it if it caused the breakdown.
Cut off the protrusion on the body.
Take a light.
Clean the holes for connecting the device (by 7 mm), and also press glue on them.
Place the center console in the car and turn on the lights.
Remove block.
Connect the parts using special connecting clips. The first wire (white-brown) must be carried out to the end of the light. Connect the two wires (yellow and black) that are missing to the cigarette lighter wires.
Pull the darts down and add them to the cigarette plug.
Place the cigarette lighter in the place.
Install the backlight.

In a wilted state

As you know, you can independently “reanimate” your cigarette. Plus, minus, whose process plays a great role, so before work, turn everything over more than once. Please refer to the instructions and recommendations of the manufacturer.

Advantages and disadvantages of automobile cigarette lighters

The biggest advantage of a cigarette smoker is the ability to connect to a new large number of electrical devices, which will make life easier in high doses. However, due to the commutation of such great connections, the structure of the structure is unreliable. Moreover, it is impossible to miss the fact that immediately, by connecting gadgets to the cigarette, we create a mechanical focus on their elements. Ideally, car manufacturers would think about increasing the cost of having a larger number of pressing legs. Then the fork would have been trimmed more “singing” by the smoker.

Since this element is in good condition, it can be repaired independently, without having to match the polarity of the car's cigarette lighter.

Electric lancet of the smoker

If your car doesn’t have a light or it’s broken, it’s not easy to get to a car mechanic. It is enough to understand how the electric lance works.

Knowing this parameter, you can easily install and correct damaged cigarette lighters in your car. For whom:

Unscrew the nut on the rear side.
Light a cigarette.
Locate the conductor plate at its lower part and remove it if it caused the breakdown.
Cut off the protrusion on the body.
Take a light.
Clean the holes for connecting the device (by 7 mm), and also press glue on them.
Place the center console in the car and turn on the lights.
Remove block.
Connect the parts using special connecting clips. The first wire (white-brown) must be carried out to the end of the light. Connect the two wires (yellow and black) that are missing to the cigarette lighter wires.
Pull the darts down and add them to the cigarette plug.
Place the cigarette lighter in the place.
Install the backlight.