Password reset on dir 300. Drotov WAN login. Login to interface

At the same time, there are not one, but a few personal computers at home. To access the Internet, your home computer (laptop, phone with WiFi support) can be connected to a router.

Different models of routers are adjusted in a different way, ale in a flash:

The router has a WAN socket - a cable is connected there, it is provided to you by an Internet provider,
Dekіlka (ring 4) "LAN" sockets - you need to plug your home computers into them.
Like a router support bezdrotove WiFi connection(if anyone has a small antenna with it), then you can plug in a laptop or mobile phone(as stinks support connection for WiFi technology) without darts.

So, as a router is an attachment, which secures sleeping access for a number of outbuildings, it is necessary to install it for a safe operation in the area, because. factory adjustments do not provide a reliable level of security and serve only for the security of cob work and attachment.

With a different router OBOV'YAZKOVO:

Change the password for access to the router parameters.
Install WPA or WPA2 authorization and access key to WiFi security.
change addressing local lines router to 192.168.123.1 or else, do not enter the range of 10.0.0.0-10.255.255.0, 172.16.0.0-172.22.255.0, 192.168.0.0-192.1

If you do not know the appointments, then be it possible to connect to your router via WiFi and get access to the Internet for your account. Until then, because the router submits the provider's instructions to the channel between usima, who is up to the new connection, Internet access speed of your computers will change in staleness due to the fact that the shards are actively corroded by the Internet of the "guest" of your router.

In addition, vikoristovuyuchi router with unsafe nalashtuvannyami you violate the legislation of the Russian Federation and public interests, which are protected by legislation, because. give the services of a link without a valid license and legal representations that you pull behind you administrative and/or criminal liability .

Setting up a router

1. Addresses for setting on D-Link routers look behind the lock: "192.168.0.1"

Yogo must be entered in the address bar of the browser (Mozilla/Opera/Chrome/Internet Explorer)

If everything is typed correctly, you can see the picture I go to qiu:

Enter password (Standard login: admin, password daily)

2. For a few addresses: 192.168.0.x є service in the company "Volkhov-Online" and їх vikoristannya can change the correct robotic tier, it is necessary to remember it. To select LAN Setup from the left menu of the SETUP section. Then remember the address of the router, for example "192.168.123.1":

To save your changes, press the "Save Settings" button

After that, as the router is rebooted, you will have to reconnect to the administrative side by dialing the address 192.168.123.1

3. If your router has WiFi functionality, you OBOV'YAZKOVO it is necessary to adjust the rules for access through the wireless barrier, for which go to the point "Wireless Setup"->"Manual Wireless Connection Setup":

4. In the event that it appeared, bring the data up to the correctness from the images (The next item "WIFI PROTECTED SETUP"->"Enable" checkmark can be unchecked)

"Network Key" you can set your own, Latin characters, numbers, and special characters ( [email protected]#$%^&*)

Once the setup is complete, press "Save Settings".

Even if you don’t work for them, your point will be available to a large number of people who can help you to use your Internet for your own purposes.

5. Setting up Internet connection is available in the section "Internet Setup"-> "Manual Internet Connection Setup"

6. Improved access to the Internet:

For correct functioning, you need to click on the "Clone MAC Address" button, so that you can copy the physical address of your PC's printer card to yourself, which will turn off the blocking of the address on the key setting).

10. Stop, if you need to change the password for access to the router, for which you need to go to the MAINTENANCE->Device Administration section:

Enter a new password, confirm it and press the Save Settings button

If you want to get rid of laying cables, do not bind up to one month of work on a computer / laptop, easily transfer all computer equipment - you need to add and install a Wi-Fi router. A series of articles about setting up different routers will help you in your home minds without much effort to set up a wireless Wi-Fi network.

In the article I will describe the installation of Wi-Fi on the butt of the Dlink Dir-300 NRU B5 router. First, it is necessary to work till the end. Then it is necessary to fix the border on the computer/laptop on automatically retrieve the IP address of the DNS server. If it connects via the Dlink web interface (it should be allowed until quiet, because you closed the web interface after updating the firmware). Introduced into the browser Mozilla Firefox) 192.168.0.1 login admin, password admin (for lock).
Let us use the Dlink Dir-300 NRU web interface. Click on the button "Wi-Fi Meister fixing a dart-free mesh".

It is necessary to put a tick in the first checkbox "Notice bezdrotove z'ednannya», I think it made sense :). The MBSSID parameter (allows one access point to serve up to four dartless networks with different settings) and BSSID (certain physical address of the point (MAC address) to access for a different network.). In domestic minds, these functions are more rarely victorious, just to that point the stench is tainted, such is too much. Onslaught "Dali".

At the next vіknі at the row "Get hotspot" unchecked, next to the SSID row we write the name of the kernless line, select the edge, the channel is left auto or optionally, it is described in the article how to designate the right channel How to select/change a wireless channel on a router/router . Chokeless mode selectable « 802.11 B/G/N mixed» , so that different outbuildings could connect to Wi-Fi, "Maximum number of clients" Leaving 0 means that the number of attachments can be connected to the Dlink Dir-300 NRU, if you enter, for example, the number 5, then the maximum number of attachments that can be connected to the wireless connection will be no more than 5.

In order for all the extensions and new and old ones to be connected without problems to Merezhi Wi-Fi, choose the least authentication "WPA-PSK/WPA2-PSK mixed".

At the row of the PSK encryption key, enter a password, which you will need to enter in order to be connected to the Wi-Fi network (I recommend that you choose a folding password, at least 8 characters with letters, numbers and special characters). All other passwords require encryption, and I recommend that you don't lock them.

At the advancing vіknі marveling at everything we ordered, we have fixed it, as if everything is ordered correctly, we press "Save" otherwise pressing "Back" we fix it.

Now it is necessary to save the setup on the Dlink Dir-300 NRU, for which animal we press the button "Save".

On which Wi-Fi setup on the Dlink Dir-300 NRU router, you can stop, close the browser window, turn on the Wi-Fi add-on, we know our measure.
Enter the password and enjoy the Internet without wires.
After configuring the router, you can proceed to fixing the local network

D-link DIR-300
Wireless Router merezhi wifi.

Connection

For successful work with configuring and logging through a web browser, you can still have JavaScript support active (instructions are given not to log in to your browser).

Shut down the computer.
Connect an Ethernet cable to the LAN ports on the gate panel D-link router DIR-300, up to the computer's Ethernet adapter.

Sockets for connecting a router

Connect the life block to the life socket on the back side of the router, and then to the socket.
Activate the computer.

Login to interface

After setting up the confusion of the computer with the D-link DIR-300 router, you can go to the web interface, where you can set up and set up the router. To start a browser and enter the address 192.168.0.1 in the row. Let's press Enter.

NOTE: If the browser shows the pardon "Unable to display the side", check that the router is connecting correctly.
Web-interface of the D-link DIR-300 router for implementations of the language. To select the Russian language, type in English at the top of the page and in the menu, which you see, type Russian.

Select Movie

Go to the side System / Administrator password
Enter your secret word in the Password and Confirmation fields.

You can insert a word, cream admin. It is allowed to write Latin letters in both registers, numbers and symbols that can be written on the keyboard. For example, press Zastosuvati.

Password change

NOTE: Write down a new secret word or add numbers. When you enter your password, you can reset the factory settings by pressing the RESET button for 20 seconds. Remember that the procedure will overwrite all the parameters you specified.
After the password has been changed, the login page to the web interface is updated. Enter the name admin and your secret word, and then Enter.

Setting up a router

To secure a connection to the Internet, go to the menu Spab - Click'n'Connect.

The cob of the router

Connect an Internet access cable to the WAN port on the D-link DIR-300 router.

INTERNET socket

To change the connection, take a look at the INTERNET indicator, the fault is on fire. To continue, press the Next button.
On the other side of the connection types, select those that match your provider.

Different types of connections

Conduct WAN call

PPPoE

Connection type PPPoE

At the field of Im'ya zadnannya write in the name.
In the fields Іm'ya koristuvach, Password and Confirmation of the password, enter the valid data given by your Internet provider.

If you need to tweak the router, go to the expert mode by clicking the toggle switch Details, at the bottom of the side.

Static IP

At the field of Im'ya z'єdnannya, enter your name.
Save the value for the IP address of that cell.
Next to the IP-address column, enter the address of the gateway.
At the middle of the Primary DNS server, enter the required data.

As a rule, these parameters are sufficient.

Dynamic IP

Connection type Dynamic IP

At the field Im'ya zadnannya write the name.
Once the ISP has entered the DNS server addresses, remove the tag Change the DNS server address automatically and enter the data in the Primary DNS server field manually.

As a rule, these parameters are sufficient.

If you need to adjust the router, switch to the expert mode by changing the toggle switch Details, at the bottom of the side.

Internet accessibility review

Here you can change access to Internet resources.

Rechecking access to the Internet

At the split Result, the result of the WAN check and the cause of possible problems will be displayed. To re-verify, press the Re-verify button again. At the end, press Dali. After which it is necessary to decide the side of the establishment of the Maistra without a dart plant.

Setting up a dartless z'ednannya

The D-link DIR-300 router has three modes of wireless wifi network.

Robotic Router Modes

Yakscho wi don't plan to beat the Wi-Fi, put a badge on Wimknuti. Press Dali, and then the Stop button.
Yakscho wi plan to install a network of wifi for connecting outbuildings, you need to set the icon to the Hotspot position.
Yakscho wi plan to connect the router to another wifi network then designate the item client.

Access point mode

In the SSID field, think up and insert your name for the link. For the introduction, you can twist numbers and Latin letters.

On the next step, you can change the security of your wifi network.
IMPORTANT: The basic settings will not provide enough protection for the drotoless local area. It is recommended to improve the security of your own.
In the window "Set security mode" in the list "Merezheva authentication" overwrite the active value "Protected security", and in the field "Security key" enter a secret word or a lower letter and digits - the password for access to the wifi network, which is enabled by your router. Come numbers and Latin letters.
If you choose to open the barrier, the "Security key" field is blocked, and you can connect to the wifi barrier without entering a password.

Safety measures wi-fi

On the next side, there is an upgrade of the D-link DIR-300 router. Turn it over correct, and then press the Stop button.

Setting up IPTV

The D-link DIR-300 router allows you to set up an IP TV system. For whom go to the distribution Meister setup IPTV.

On the side, you can select the LAN port, until which you choose to connect the IPTV set-top box.
To organize access to the Internet and IPTV services, the provider is corroborated by virtual barriers (VLAN ID). At this time, get access to the IPTV service, how to get further instructions.

From the left menu, select Dodatkovo, sub-item VLAN.
Create a port group from the VLAN ID values and set the type to Prozory.
Specify the port for connecting an IPTV set-top box.

To save the settings, press Save.

The D-link DIR 300 router has two interfaces. The article has a description of the light theme. We invite you to marvel at the video of how to fix the same router, but already in primary topic interface.

At today's statistics language pide about how to install, connect, and configure the D-link DIR 300 router. For this reason, the instructions for the rich DIR 300 have been reviewed here.

The D-link DIR 300 router allows you to quickly organize a wireless network in the office at home. Until then, you can connect the Internet via Ethernet lines and distribute yoga over Wi-Fi.

If your Internet is connected via a telephone line, then read the instructions for another modem of the same dialer: .

Obviously, through DIR 300 you can distribute ADSL Internet, but you can connect it directly to the telephone line. For some reason, you may have to connect to a DSL modem, which will connect with a telephone line, for example, DIR 300 + DSL 2500U (without Wi-Fi). Such a scheme may be in the area, but on the other hand, a great modem without WiFi and you want to organize a wireless network. Ale, if one of the outbuildings breaks down, you can use the Internet without Wi-Fi. To that, rather than a mother, one attachment for all needs.

Upgrading to the router, the first thing that is recommended is to update the firmware. You won’t stumble on what, you could see at the front statue.

Internet connection in D-link DIR 300 router

To set up the Internet, for the D-link DIR 300 router, select the Setup tab from the horizontal menu, and in the Internet Setup section, then click the Manual Internet Connection Setup button.

You have to pay attention to the distribution of Internet Connection Type, - here you select the type of connection to the Internet, which should be the type of provider.

Later, let's take a closer look at the types of connection to the all-world line.

Dynamic IP

Access Point - this icon turns on NAT (Network Address Translation) and robs the router from a normal access point.
Dynamic IP – activate automatic IP address recovery.
Host Name - optional power, as it is required by Internet providers. For promotions, the name of the router model is indicated.
MAC Address - Promotionally recorded WAN MAC address. It is not recommended to change it, because the provider does not help.
Clone MAC Address - here you can change the WAN MAC address to the MAC address of the router.
Primary DNS Addresses - enter the primary DNS server address specified in your Internet settings.
Secondary DNS Addresses - optional, secondary DNS.
MTU - the maximum transmission unit for optimizing the productivity of the provider's network.

PPPoE

Danish type of login transfers the presence of a login and a password for access to the account.

The checkbox Dynamic PPPoE or Static PPPoE is checked by setting the Internet provider.
User Name - the name of the koristuvach.
Password - password.
Service Name - optional, service provider name.
IP Address - Wicked if Static PPPoE is selected.
Primary/ Secondary DNS Addresses - primary and secondary (optional) DNS server.
MTU - maximum transmission unit, abbreviated cost 1492.
Connection Mode Selec - select: always (permanently enabled), manual (manually), Connect-on demand (for help).

PPTP

With this type of login, the password will be removed.

Dynamic PPPoE or Static PPPoE - a parameter that can be set as a provider.
IP Address - Specify IP address for Static PPTP.
Subnet Mask - Primary and Secondary DNS addresses (winning for Static PPTP).
Gateway - IP gateway assigned by an Internet provider.
DNS - DNS server addresses.
Server IP - "IP" of the server.
PPTP Password - password.
PPTP Confirm PPTP - re-enter the password.
Maximum Idle Time - the maximum hour of idle Internet.
MTU - the maximum transmission unit, which is awarded by the provider.
connect mode

L2TP

Dynamic or Static IP - the value of the choice, which should be determined by the provider.
IP Addres - Enter the IP address for Static L2TP.
Subnet Mask - primary and secondary (optional) DNS addresses for Static.
Gateway - IP addresses of the gateway.
DNS - DNS addresses of the provider.
Server IP - Server IP.
L2TP Account - the name of the oblіkovogo record.
L2TP Passwor - password.
Maximum Idle Time - the maximum hour of idle internet connection.
MTU - maximum transmission unit, if necessary, you can change this parameter.
Connect Mode - Choose a value.

static IP

This type of call will be victorious only if the provider new information about IP WAN.

IP Address - reported by the provider.
Subnet Mask – mask entry field.
ISP Gateway - Gateway.
MAC Address - WAN MAC addresses are inserted behind the lock, if necessary - change to the one you need.
Clone MAC Address - for the help button, the Ethernet MAC address is copied, set by the provider and the MAC WAN is changed to the MAC of the router.
Primary and Secondary DNS Address - primary and secondary DNS servers.
MTU - for locking the cost 1492, but you can change it in a reasonable way to fix the fence.

Russian PPPoE

This type of connection is often challenged by Russian Internet providers.

User Name - the name of the koristuvach.
Password - password.
Service Name — name of the provider's service.
IP Address - "IP" (specified for Static PPPoE).
MAC is optional.
DNS - primary and secondary DNS server.
MTU - 1492, you can change to another one.
Connection Mode Selec - Select.

Trochs below under the inscription WAN Physical Setting indicate that the WAN has been adjusted. How to win Static IP, fill in the necessary fields to configure the router. For a dynamic IP, select Dynamic, you do not need to enter any other parameters.

Russian PPTP

Another type of connection, which is often won by Russian Internet providers.

By analogy with the suggestions made above by the adjustments:

IP Address - IP addresses for Static PPTP.
Subnet Mask - primary and secondary DNS Static PPTP.
Gateway - IP gateway.
DNS — information about DNS servers.
Server IP - "IP" of the server.
PPTP Account - the name of the public record.
PPTP Password - password.
Maximum Idle Time - an hour of downtime.
MTU is a standard value that can be changed.
Connect Mode - Select an option.

Yak bachite, nalashtuvannya different types These days are similar one to one, but it does not change the fact that you enter them respectfully, otherwise you will not be able to connect to the Internet.

Now let's take a look at how to fix Wi-Fi on the D-link DIR 300 router.

WiFi setup

To select the wireless setup in the horizontal menu, select Setup, and expand the Wireless Setup section. Let's click on Manual Wireless Connection Setup.

We know the basic Wi-Fi setup in the D-Link DIR 300.

Wi-Fi Protected Setup - stuck zahistu wifi. Check the Enable checkbox and press the Generate New PIN button (to generate a PIN) or Reset PIN to Default (to reset to default settings), and then go to the settings below.
Enable - Empowerment of a kerfless tether.
Wireless Network Name - the name of the wireless network.
Wireless Channel - configuring the DIR-300 channel.
Transmission Rate - Select the rate of transmission of data.
WMM Enable - Select the priority type of traffic.
Enable Hidden Wireless - This feature is highlighted. Bezdrotova merezha will not be seen broadly. To connect to Wi-Fi, you need to know the SSID.

The upcoming upgrade of Wireless Security Mode is confirmed for the security of the wireless security system. Here, on the vibir, security modes are being promoted, ours should have WPA2 ONLY.

Below, in the Cipher Type field, enter the type of encryption. For PSK/EAP, select PSK. For Network Key - Enter a password for a non-rotor network.

Setting up local LAN networks

The next menu changes the local network setup and DCHP (Dynamic Host Configuration) settings. To enter the necessary settings, go to the Setup - LAN Setup section.

Router IP Address - Required for setting the IP address of the router. Spochatku for DIR 300 jobs 192.168.0.1
Default Subnet Mask - subnet mask. Spontaneous cost 255.255.255.0
Local Domain Name - optional, domain name.
Enable DNS Relay - as set, it will transfer DNS information from the provider to the computer. If this parameter is not selected, the router will be replaced as a DNS server.

Batkivsky control (Parental Control)

This function blocks access to the created list of sites.

Select from list Turn Parental Control ON or Turn Parental Control OFF Batkiv control.

In the Website URL field, enter the URL, access to which you need to allow or block. So here you can say keywords, if they appear on site addresses, the stench will be blocked.

The Schedule parameter is set for the adjusted hour - the layout, if the father's control can be activated.

That's all, a description of the main set up Wi-Fi router D-link DIR 300 is completed. Possibilities of the router, which are left out, take it on your own.